HI, MY NAME IS STEVE AND WELCOME TO MY HONDA CB400N / CB250N SUPERDREAM WEB PAGE. I HAVE THE VARIOUS PARTS PICTURED BELOW FOR SALE. IF YOU SEE A PART YOU WANT OR HAVE ANY QUESTIONS ETC THEN PLEASE USE THE E-MAIL ADDRESS SHOWN IN THE TOP LEFT OF THIS PAGE I HOPE YOU CAN FIND SOMETHING YOU CAN USE AND THANKS FOR LOOKING.

ELECTRICAL PARTS:-

CLICK ON PICTURES TO ENLARGE.	PART No. PART / DESCRIPTION / DETAILS.	CLICK ON PICTURES TO ENLARGE.	PART No. PART / DESCRIPTION / DETAILS.
	PART - 021 ELECTRICS BRACKET - SOLID, THREAD ALL OK. FINISH A LITTLE RUSTY.		PART - 127 STARTER SOLENOID, WITHOUT RUBBER - GOOD, TESTED.
	PART - 133 STARTER SOLENOID RUBBER - GOOD, NOT PERISHED OR SPLIT.		PART - 526 REAR BRAKE LIGHT SWITCH - VERY GOOD.

PART - 662 FLASHER RELAY - GOOD, TESTED & OK.

PART - 529 CONSOLE / WARNING DISPLAY BULB HOLDER / LOOM & CLOCKS BRACKET - VERY GOOD, BULB SOCKETS CLEAN. LOOM VERY GOOD.

ANCILLARY PARTS:-

CLICK ON PICTURES TO ENLARGE.	PART No. PART / DESCRIPTION / DETAILS.	CLICK ON PICTURES TO ENLARGE.	PART No. PART / DESCRIPTION / DETAILS.
	PART - 389 CLOCKS MOUNTING BRACKET - VERY GOOD.		PART - 391 SPEEDO & TACHO BRACKET FROM INSIDE THE CLOCK HOUSING - GOOD.

		PART - 170 TAIL LIGHT LENS - VERY GOOD. (Note: seal & screws sold).
		PART - 387 CLOCKS / INSTRUMENTS CASING TOP - NO DAMAGE, FINISH A BIT FADED.

			PART - 028 STANLEY 001-2130 HEADLIGHT - ALL A BIT TATTY, GLASS LOTS OF SMALL STONE MARKS, RIM PITTED.
			CHROME INSIDE MOSTLY OK BUT A LITTLE AROUND THE PARKING LIGHT IS CORRODED
			PART - 195 HEADLIGHT SHELL - GOOD, WITH INSERTS, ONE TINY CRACK REPAIRED WITH PLASTEX, (ON BOTH INSIDE & OUT, 100% SOLID).
			PART - 400 ORIGINAL STANLEY TAIL LIGHT LENS - GOOD UNDAMAGED CONDITION.

RUNNING GEAR & BRAKE PARTS:-

CLICK ON PICTURES TO ENLARGE.	PART No. PART / DESCRIPTION / DETAILS.	CLICK ON PICTURES TO ENLARGE.	PART No. PART / DESCRIPTION / DETAILS.
	PART - 099 PAIR OF BANJO BOLTS - SERVICEABLE.		PART - 116 REAR BRAKE SPRINGS - GOOD.
	PART - 206 FRONT WHEEL SHAFT - THREAD & NUT GOOD.		PART - 223 REAR BRAKE SPRING - GOOD.
	PART - 282 ALLEN BOLTS - GOOD, FROM THE FOOTREST MOUNTS I THINK ?.		PART - 308 RUBBER - NOT SURE WHERE THIS IS FROM, GOOD CONDITION, NOT SPLIT OT PERISHED.
	PART - 309 LOCKING "R" CLIP - FROM THE REAR WHEEL SHAFT.		PART - 311 BRAKE LEVER BOLT - I THINK ? , GOOD.
	PART - 346 CIRCLIP - GOOD. NOT SURE WHERE THIS CAME FROM.		PART - 350 REAR FOOT REST / PEG RUBBER - GOOD.
	PART - 358 FOOT REST PLATE ( i think) MOUNTING ALLEN BOLTS - GOOD.		PART - 382 REAR BRAKE ROD NUT - GOOD.
	PART - 438 PAIR OF FORK DAMPERS - VERY GOOD		PART - 438A PAIR OF FORK SPRINGS - VERY GOOD
	PART - 470 REAR WHEEL ADJUSTER BOLTS - SERVICEABLE.		PART - 471 FRONT WHEEL SHAFT & SPACER & NUT - SERVICEABLE.
	PART - 479 YOKE TOP WASHER - VERY GOOD.		PART - 489 VARIOUS FORK PARTS - ALL SERVICEABLE. NOTE: THE TOP BOLT IN THE MIDDLE OF THE PHOTO HAS BEEN SOLD.

		PART - 073 LEFT FRONT FOOT REST - GOOD, WITH A GOOD RUBBER, NO DAMAGE, METAL NEEDS PAINTING.
		PART - 078 SWINGING ARM SHAFT - GOOD, FINISH A LITTLE TARNISHED.
		PART - 083 FORK GAITERS - ONE HAS A SMALL SPLIT, OTHER OK.
		PART - 109 REAR WHEEL BRAKE PLATE - NO DAMAGE, NEEDS POLISH OR PAINT.
		PART - 349 REAR WHEEL BRAKE PLATE - NO DAMAGE, NEEDS POLISH OR PAINT.
		PART - 162 RIGHT HAND FOOT REST - GOOD, NOT SCUFFED.
		PART - 163 LEFT HAND FOOT REST - GOOD, NOT SCUFFED
		PART - 268 SWINGING ARM SHAFT & NUT - GOOD.

CB250N ENGINE & GEARBOX PARTS:-

CLICK ON PICTURES TO ENLARGE.	PART No. PART / DESCRIPTION / DETAILS.	CLICK ON PICTURES TO ENLARGE.	PART No. PART / DESCRIPTION / DETAILS.
	PART - 052 CAM COVER SEAL - SERVICEABLE.		PART - 054 PRIMARY GEAR ? (I THINK) - VERY GOOD.
	PART - 056 ENGINE DOWELS - SERVICEABLE.		PART - 088 VARIOUS ENGINE BOLTS - ALL SERVICEABLE.(NOTE: the two allen screws in the photo have been sold).
	PART - 100 VALVES SPRINGS ETC - ALL GOOD, WILL SPLIT.(SOME INLET SPRINGS ETC SOLD).		PART - 101 INLET VALVES - SOME LIGHT WEAR BUT STILL SERVICEABLE, WILL SPLIT.
	PART - 305 INLET VALVES - GOOD.
	PART - 459 SUMP PLUG / BOLT - GOOD.		PART - 667 RUBBER BUNGS FROM HEAD COVER - GOOD.

		PART - 034 OIL FILTER COVER - GOOD BUT HAS A COUPLE ON SMALL CHIPS.
		PART - 049 STARTER GEAR - VERY GOOD.
		PART - 442 GEAR CHANGE SHAFT - VERY GOOD, SPLINES PERFECT.
		PART - 443B KICK START GEAR - VERY GOOD.
		PART - 538 END CAP FROM INPUT SHAFT - GOOD.
		PART - 461 SOME VALVES & SPRING ETC - GOOD.

CB400N ENGINE & GEARBOX PARTS:-

CLICK ON PICTURES TO ENLARGE.	PART No. PART / DESCRIPTION / DETAILS.	CLICK ON PICTURES TO ENLARGE.	PART No. PART / DESCRIPTION / DETAILS.
	PART - 232 GEAR BOX - ALL GOOD.
	PART - 242 CAMSHAFT SPROCKET - VERY GOOD.		PART - 245 OIL PUMP - VERY GOOD.
	PART - 274 VALVES SPRINGS ETC - VERY GOOD.		PART - 281 CAMSHAFT COVER SEAL - GOOD.

PART - 289 LARGE SELECTION OF VARIOUS CB400N ENGINE PARTS - JUST LET ME KNOW OF YOU SEE A PART YOU NEED.(Note; Long head bolts & CONROD SOLD).

MISCELLANEOUS & EVERYTHING ELSE:-

CLICK ON PICTURES TO ENLARGE.	PART No. PART / DESCRIPTION / DETAILS.	CLICK ON PICTURES TO ENLARGE.	PART No. PART / DESCRIPTION / DETAILS.
	PART - 094 HEADLIGHT SHELL SIDE INSERTS - GOOD.		PART - 207 SPEEDO CABLE INNER - VERY GOOD.
	PART - 209 TACHO / REV COUNTER CABLE - SERVICEABLE.		PART - 261 SIDE PANEL RUBBERS - VERY GOOD. I HAVE 8 OF THESE. (Size : 27.5mm widest measurment, for use with 18-20mm hole.)
	PART - 303 SINGLE METAL COLLAR - VERY GOOD. (EXHAUST ??? )		PART - 310 RUBBER CONNECTOR FROM THE AIRBOX I THINK - VERY GOOD.
	PART - 324 FLASHER RUBBER - GOOD.		PART - 336 ENGINE HANGER BRACKET ( 11851-414-000 ) - GOOD.
	PART - 359 FRONT TANK MOUNTING BOLT ( I think) - GOOD.		PART - 374 BOLT - 10mm DIAMETER X 98mm LONG & NUT - GOOD, NOT SURE WHERE THIS IS FROM.
	PART - 385 SINGLE HANDLEBAR CLAMP - GOOD.
	PART - 465 TAIL LIGHT MOUNTING RUBBER & SCREWS - GOOD. (Note: long screw sold).		PART - 505 HEADLIGHT EARTH BOLTS WITH REFLECTOR THREADS - VERY GOOD. (two bolts sold).
	PART - 670 CABLE GUIDE - GOOD.		PART - 672 VARIOUS LEFT OVER PARTS - GOOD.

BACK TO THE TOP.