CLICK ON PICTURES TO ENLARGE. |
PART No.
PART / DESCRIPTION / DETAILS. |
CLICK ON PICTURES TO ENLARGE. |
PART No.
PART / DESCRIPTION / DETAILS. |
|
CB250 - 626
DIP STICK - GOOD, LENGTH = 136mm SEAT TO TIP. |
|
CB250 - 627
DIP STICK - GOOD, LENGTH = 90mm SEAT TO TIP. |
|
CB250 - 633
AIR FILTER SIDE COVER - GOOD BUT NEEDS PAINT. |
|
CB250 - 638
RUBBER SEAL - GOOD, NOT PERISHED. noT SURE IF THIS IS A TAIL LIGHT SEAL ??. |
|
CB250 - 662
GEARBOX SELECTOR DRUM & FORKS - GOOD. |
|
CB250 - 663
GEAR SELECTION PARTS - ALL GOOD. |
|
CB250 - 664
DRIVE GEAR - GOOD. |
|
CB250 - 665
DRIVE GEAR - GOOD. |
|
CB250 - 669
CABLE HOLDERS - GOOD. |
|
CB250 - 680
CRANKCASE STUDS - ALL WITH GOOD THREADS. SIZE = 20cm X 8mm. |
|
CB250 - 951
CLUTCH PUSH ROD - GOOD, STRAIGHT, LENGTH = 246mm. |
|
CB250 - 635
REAR BRAKE ARM CAM - GOOD, SPLINES ARE VERY GOOD. |
|
|
CB250 - 645
SINGLE EXHAUST CLAMP - GOOD, 54mm BETWEEN HOLE CENTRES, STUD HOLE IS 7mm. |
|
|
CB250 - 651
NOT SURE WHERE THIS FITS - GOOD, NO DAMAGE, INSIDE DIAMETER = 14mm, OUTER EDGE = 61mm. |
|
|
CB250 - 652
SHAFT - GOOD, NO DAMAGE TO THREADS, 27cm LONG, DIAMETER 15mm. |
|
|
CB250 - 653
SHAFT - GOOD, NO DAMAGE TO THREADS, 28cm LONG, DIAMETER 14mm. |
|
|
CB250 - 671
CAMSHAFT SPROCKET- VERY GOOD, NO WEAR. |
|
|
|
CB250 - 621
DISC SHIELD / SPAT - NO SPLITS, HAS A FEW LIGHT MARKS, VERY SERVICEABLE. |
|
|
|
CB250 - 623
ADVANCE / RETARD UNIT - WORKING FREELY, THE LOBE HAS SOME LIGHT CORROSION MARKS. |
|
|
|
CB250 - 636
ALTERNATOR ROTOR - VERY GOOD. 6320060-2490 2BX |
|
|
|
CB250 - 644
WING MIRROR - SERVICEABLE, THREAD AND GLASS GOOD, BACK PITTED, STEM RUSTY. |
|
|
|
CB250 - 668
REAR DRIVE SPROCKET - 39 TOOTH, SERVICEABLE. |
|
|
|
CB250 - 678
SOME INDICATOR PARTS - ALL A BIT TATTY, FOR SPARES. |
|
|
|
CB250 - 681
SELECTION OF GEARBOX PARTS - WILL SEPERATE. |
|
|
|
CB250 - 943
ALTERNATOR COVER / CASING - VERY GOOD. |
|
|
|
CB250 - 944
ALTERNATOR COVER / CASING - GOOD, HAS THE ODD VERY LIGHT MARK. |
|
|
|
CB250 - 946
CLUTCH PARTS - ALL GOOD FOR SPARES I./E NO PLATES, WILL SPLIT. |